Home
Shopping Cart
Contact Us
1-888-718-0300 International: 1-360-867-1798

Dynaudio AIR 25 - 5.1 Digital Only (up to 96kHz)

Dynaudio AIR 25 - 5.1 Digital Only (up to 192kHz)

AIR 25 Active Nearfield 5.1 Digital Only set (1 AIR 25 Digital Master and 4 Slaves) with AIR Remote, AIR SOFTware, and AIR Base-2 Dual 10" subwoofer.

The AIR 25 offers transparency, consistent speaker performance and outstanding possibilities for optimizing performance in different Acoustical environments. Operating at a staggering sample rate of 192 kHz supported via Dual Wire, the integration with DAWs is seamless. A digital output can be fed directly into the AIR 25 supporting 2.1, 5.1, 6.1 and 5.3 setups. The AIR 25 is developed for both stereo and multi-channel monitoring in demanding production environments including:

Post Production
Music Recording and Mixing
Film Editing
DVD authoring and Mastering
5.1 Production (Audio or Audio for pictures)
Broadcast
Edit suites

Combining technology from Dynaudio and TC, AIR 25 offers ultimate precision and sound.

The AIR 25 monitor is the second 3-way design from Dynaudio Acoustics integrating the AIR technology. Combining brand new Dynaudio 221 (two-to-one) technology with cutting-edge digital TC technology, the AIR 25 defines new standards for performance and precision in 3-way powered monitors. With the massive power that this monitor packs - a stunning 4x300-watt amp package - most demanding applications will be dealt with like a breeze.

2x10" woofer, one 5.5" midrange and one 1.1 soft dome tweeter
192 kHz support via Dual Wire
Advanced Bass Management, with selectable frequency crossover points
Acoustic Placement Compensation
Preset Storage and Recall
Programmable reference levels
Level alignment in 0,1dB steps
+/- 0.2dB precision alignmentIntegrated Parametric EQ's and Delay in each monitor (PC-IP only)
Central and Remote control of system and parameters
Direct Digital inputs and Analog inputs (optional)
Networking in-between all AIR components
221 (two-to-one) design - Integrating unique Tweeter and Midrange technology
Four times 300-watt amp package

Specifications

AIR Monitors (master and slave)

System: Three-way Active Nearfield Monitor
Frequency response (+/- 3 dB): 28 Hz –22 kHz: +/- 3 dB
Peak SPL 1m, pair (IEC Short Term): 134 dB peak
Peak SPL 2m, 5.1 (IEC Short Term): 132 dB peak
Max SPL 1m, (IEC Long Term): 107 dB RMS
Precision of monitor matching: +/- 0.2 dB
Port tuning frequency: 35 Hz
Internal cabinet volume: 68 litres
Bass principle: Bass reflex
Crossover frequency: 400 Hz (DSP generated) and 2400 Hz (DSP generated)
Crossover slope: 12/6 dB/Oct, 12/6 dB/Oct
Tweeter: Esotar 28 mm / 1.1” soft dome, neodymium magnet, rear chamber,
Midrange: 145 mm / 5,5", one-piece molded polypropylene cone, 38 mm /
Woofer: 2x240 mm / 9,5", one-piece molded polypropylene cone, 100
Mains voltage: 100 to 240 VAC, 50 to 60 Hz (select)
Power consumption: 45 W @ 1/8 max power (IEC 60065)

Finish

Amp: Black painted back plate
Cabinet: Black ash with dark gray MDF baffle
Dimensions (H x W x D): 510 x 535 x 450 mm /20” x 21” x 17,7”
Depth incl. amp and driver: 490mm / 19,3”
Weight: 46 kg / 101 lbs

Amplifier

Tweeter, midrange and woofer Tweeter 300 W amp/Midrange 300 W amp/Woofer 2x300 W amp

Room & Distance

Typical listening distance: TBA
Typical room size: 80-150m3 / 2800-5200 ft3

System sample rates

Internal sample rate: 192 and 176.4 via Dual Wire (optional Digital Card required) and 96, 88.2, 64, 48, 44.1 or 32 kHz

AIR Masters only

I/O Connectors: XLR (2 channels AES/EBU in) 3 x RJ 45 proprietary TC Link
Formats: AES/EBU (24 bit)
Word clock input: BNC, 75ohm, 0.6-10 Vpp
Display: 2 x 16 character dot matrix
Operation: Menu system / Four buttons

Analog Input options

Input connectors: XLR balanced (pin 2+, pin 3-)
Impedance: 10/3 k ohm (Balanced/unbalanced)
Selectable Full scale Input level: +9, +15, +21, +27 dBu
Dynamic range: > 113 dB typ. (unweighted), BW: 20-20 kHz
THD+N: < -105 dB typ. @ 1 kHz, -3 dBFS
Crosstalk: < -120 dB, 20 Hz to 20 kHz
A to D Conversion: 24 bit (Dual bit delta sigma sampling at 4.1/5.6/6.1/6.1 MHz)
I/O Connectors: 2 x RJ45 proprietary TC-Link

EMC

Complies with: EN 55103-1 and EN 55103-2, FCC part 15 class B, CISPR 22 class B

Safety

Certified to: IEC 60065, EN 60065, UL 6500 and CSA E60065 CSA FILE #LR108093

Enviroment

Operating temperature: 32° F to 122° F (0° C to 50° C)
Storage temperature: -22° F to 167° F (-30° C to 70° C)
Humidity: Max. 90 % non-condensing

Warranty

Parts & Labor: 1 year

AIR BASE-2

AIR Base-2 – a dedicated AIR series active subwoofer – is suited for small to medium sized rooms together with AIR 6 or AIR 15. Several units can be linked where in bigger rooms increasing acoustic output 6 dB for each additional unit linked.

Through the TC Link (proprietary AIR network) AIR Base-2 integrates with AIR series monitors and delivers unique features such as integrated bass management and presets. To be used with both stereo and multichannel AIR systems in any demanding production environment including:

Post Production and Editing suites
Music Recording and Mixing
DVD authoring and Mastering
5.1 Production (Audio or Audio for pictures)
Broadcast
Film editing

Combining technology from Dynaudio and TC, AIR Base-1 offers ultimate precision and total integration with AIR Series. AIR Base subwoofers can be used only with AIR Series monitors.

Typical room size range for one AIR Base-2 is:
50-100 m3 / 1600-4400 ft3
Typical room size range for two AIR Base 2’s is:
75-125 m3 / 2600-4400 ft3

Features

375-watt amplifier
192 kHz support via Dual Wire
TC Link input only - for total AIR Series integration
Bass Management LP filters with selectable frequency crossover points integrates with corresponding HP filters in AIR Series monitors
Advanced Bass Management
LFE gain programmable in 0.5dB steps
Selectable LFE 120 Hz LP filter (brickwall)
Phase adjustment
Programmable reference levels
Level alignment in 0,1dB steps
ntegrated Parametric EQ’s and delay (only accessible with PC-IP)
Central and Remote control of system and parameters

Specifications

General

System: Active Subwoofer
Total Frequency response: 23 Hz – bssmng: 120 Hz, LFE: 2.5 kHz : +/- 3dB
Max SPL 1m, pair (IEC short term): 121 dB peak
Max SPL 2m, 5.1 (IEC short term): 115 dB peak
Precision of Monitor matching: +/- 0.2 dB
Port tuning frequency: 27 Hz
Internal Cabinet volume: 78 liters
Bass principle: Bass reflex
Woofer: 2 pcs. 240mm / 10", one piece molded polyprop dome, 100mm / 4" pure alu voice coil
Mains voltage: 100 to 240 VAC, 50 to 60 Hz (auto-select)
Power consumtion: Idle: 50W / Max: 375W

Finish

Amp: Black anodized alu back plate
Cabinet: Dark gray MDF baffle, Silver foil
Dimensions (HxWxD): 900x310x420
Weight: Depth incl. amp & driver: 447mm, 29kg

Amplifier

System sample rates
Internal sample rate: 96 kHz
External sample rate: 31-97 kHz
I/O Connectors: 2xRJ 45 proprietary TC Link

EMC

Complies with: EN 55103-1 and EN 55103-2, FCC part 15 class B, CISPR 22 class B

Safety

Certified to: IEC 60065, EN 60065, UL 6500, & CSA E60065, CSA File# LR 108093

Enviroment

Operating temperature: 32° F to 122° F (0° C to 50° C)
Storage temperature: -22° F to 167° F (-30° C to 70° C)
Humidity: Max 90% non-condensing

Warranty

Parts & Labor: 1 year

AIR Remote

AIR Remote is a dedicated hardware remote control that ensures convenient daily operation. AIR Remote provides instant access to all significant operation parameters such as global volume, reference levels, preset recall as well as solo and mute status for each monitor. The AIR Remote is powered through a ‘TC Link’ cable which is connected any AIR monitor.

Features

Global volume control
Recall and Storage of three Reference levels
Mute and Solo of individual speakers
Preset recall

In any audio system the level gain control is best placed as late as possible in the signal chain which is the reason that AIR enables control of level and gain directly on the monitors themselves.

The AIR Remote control is a natural extension to any AIR system ensuring convenience and performance in daily operation.

Main features include

Central master level adjustment of all connected monitors
Large friendly potentiometer with "analog feel"
Instant access of three different user defined Reference Level settings
Instant Preset Recall function up to 4 presets. This way you can easily switch between different setups from your listening position
Mute/unmute and solo function for each monitor in the setup

General

Finish: Black anodized alu & plastic
Dimensions (DxWxH): 120x70x35
Weight: 250g
I/O Connectors: 1 x RJ 45 proprietary TC Link

EMC

Complies with: EN 55103-1 & EN 55103-2, FCC part 15 class B, CISPR 22 class B

Safety

Certified to: IEC 60065, EN 60065, UL 6500 & CSA E60065, CSA FILE# LR108093

Enviroment

Operating temperature: 32° F to 122° F (0° C to 50° C)
Storage temperature: -22° F to 167° F (-30° C to 70° C)
Humidity: Max. 90% non-condensing

Warranty

Parts & labor: 1 year

Brochure PDF: View PDF Brochure
Manual PDF: View PDF Manual
Manufacturer's site: http://www.dynaudioacoustics.com/
Availability: Usually ships within 24 hrs.

Sale price: $ 22,158.00 (No sales tax outside of WA)

Found a better price? Give us a call!
or use the "Make an Offer" option below.




Quantity
OR What is "Make an Offer"

FREE GROUND SHIPPING ON MOST ORDERS!
(Within the continental USA)
No sales tax to customers outside of WA State.


Search

> Advanced Search

Shopping Cart

	Cart is empty

View cart
Secure checkout

If you have disabled Javascript in your browser click here

Username

Password

Recover password

Special Sales

Enter email address to receive information on our special sales.