Home
Shopping Cart
Contact Us
1-888-718-0300 International: 1-360-867-1798

Dynaudio AIR 6 - 5.1 Digital Only (up to 192kHz)

Dynaudio AIR 6 - 5.1 Digital Only (up to 192kHz)

Includes: Five AIR 6 Active Nearfield Monitors (3 "Digital 6" Master and 2 Slaves) with AIR Remote, AIR SOFTware and AIR Base-1 SINGLE 10in. subwoofer. This system is 192k ready!

AIR6 is developed for both stereo and multichannel monitoring in any demanding environment including:

Post Production
Music Recording and Mixing
Film Editing (smaller rooms)
DVD authoring and Mastering
5.1 Production (Audio or Audio for pictures)
Broadcast
Edit suites

Typical listening distance 1.2-2m / 4-7ft
Typical room size 50-100m3 / 1600-3500ft3

6.5" woofer and 1.1 soft dome tweeter
192 kHz support via Dual Wire
Bass Management, with selectable frequency crossover points
Advanced Bass Management
Acoustic Placement Compensation
Preset Storage and Recall
Programmable reference levels
Level alignment in 0,1dB steps
All Monitors aligned within +/- 0.2dB precision
Integrated Parametric EQ’s and delay in each monitor (only accessible with PC-IP)
Central and Remote control of system and parameters
Direct Digital inputs and Analog inputs (optional)
Networking in-between all AIR components
Dedicated AIR Base subwoofers
Two times 200-watt amp package in each monitor

Specifications
General

System: 2 way active NearField Monitor
Frequency response (+/- 3 dB): 40 Hz – 22 kHz
Peak SPL 1m, pair (IEC Short Term): > 128 dB peak
Peak SPL 2m, 5.1 (IEC Short Term): > 126 dB peak
Max SPL 1m, (IEC Long Term): 104 dB RMS
Precision of monitor matching: +/- 0.2 dB
Port tuning frequency: 45 Hz
Internal cabinet volume: 12.1 litres
Bass principle: Bass reflex
Crossover frequency: 2150 Hz (DSP generated)
Crossover slope: 24dB/oct (Linkwitz Riley, DSP generated)
Tweeter: Esotec 28mm / 1.1" soft dome, rear chamber, magnetic fluid, 4 mm die-cast alu front, pure aluwire voice coil
Woofer: 175mm / 6.9" one-piece molded polypropylene cone, 75mm / 3" pure alu wire voice coil
Mains voltage: 100 to 240 VAC, 50 to 60 Hz (auto-select)
Power consumtion: 40 W @ 1/8 max power (IEC 60065)

Finish

Amp: Black anodized alu back plate
Cabinet: Dark gray MDF baffle, Silver foil
Dimensions (HxWxD): 338 x 216 x 345mm / 13,3” x 8,5” x 13,6”
Weight: 9.8 kg / 21.8 lbs

Amplifier

Tweeter and woofer Tweeter 200 W amp/Woofer 200 W amp

Room & Distance

Typical listening distance: 1.2-2 m / 4-7 ft
Typical room size: 50-100 m3 / 1600-3500 ft3

System sample rates

Internal sample rate: 192 and 176.4 via Dual Wire (optional Digital Card required) and 96, 88.2, 64, 48, 44.1 or 32 kHz

AIR Masters only

I/O Connectors: XLR (2 channels AES/EBU in) 3 x RJ 45 proprietary TC Link
Formats: AES/EBU (24 bit)
Word clock input: BNC, 75ohm, 0.6-10 Vpp
Display: 2 x 16 character dot matrix
Operation: Menu system / Four buttons

Analog Input options

Input connectors: XLR balanced (pin 2+, pin 3-)
Impedance: 10/3 k ohm (Balanced/unbalanced)
Selectable Full scale Input level: +9, +15, +21, +27 dBu
Dynamic range: > 113 dB typ. (unweighted), BW: 20-20 kHz
THD+N: < -105 dB typ. @ 1 kHz, -3 dBFS
Crosstalk: < -120 dB, 20 Hz to 20 kHz
A to D Conversion: 24 bit (Dual bit delta sigma sampling at 4.1/5.6/6.1/6.1 MHz)
I/O Connectors 2 x RJ45 proprietary TC-Link

EMC

Complies with: EN 55103-1 and EN 55103-2, FCC part 15 class B, CISPR 22 class B

Safety

Certified to: IEC 60065, EN 60065, UL 6500 and CSA E60065 CSA FILE #LR108093

Enviroment

Operating temperature: 32° F to 122° F (0° C to 50° C)
Storage temperature: -22° F to 167° F (-30° C to 70° C)
Humidity: Max. 90 % non-condensing

Warranty

Parts & Labor: 1 year

AIR BASE-1

AIR Base-1 is the most compact dedicated AIR series active subwoofer. Intended for smaller rooms AIR Base-1 offers high performance where space is an issue. Use one AIR Base-1 with AIR 6 in smaller rooms or link several Base-1’s in bigger rooms increasing acoustic output 6 dB for each additional unit.

Through the TC Link (proprietary AIR network) AIR Base-1 integrates with AIR series monitors and delivers unique features such as integrated bass management and presets. To be used with both stereo and multichannel AIR systems in any demanding production environment including:

Post Production and Editing suites
Music Recording and Mixing
DVD authoring and Mastering
5.1 Production (Audio or Audio for pictures)
OB Vans

Combining technology from Dynaudio and TC, AIR Base-1 offers ultimate precision and total integration with AIR Series. AIR Base subwoofers can be used only with AIR Series monitors.

Typical room size range for one AIR Base-1 is :

30-60 m3 / 1000-2000 ft.3

Typical room size range for two or three AIR Base-1’s is:

50-100m3 / 1600-3500ft3

250-watt amplifier
192 kHz support via Dual Wire
TC Link input only - for total
AIR Series integration
Bass Management LP filters with selectable frequency crossover points integrates with corresponding HP filters in AIR Series monitors
Advanced Bass Management
LFE gain programmable in 0.5dB steps
Selectable LFE 120 Hz LP filter (brickwall)
Phase adjustment
Programmable reference levels
Level alignment in 0,1dB steps
Integrated Parametric EQ’s and delay (only accessible with PC-IP)
Central and Remote control of system and parameters

Specifications

General

System: Active Subwoofer
Total Frequency response: 25 Hz – bssmng: 120 Hz, LFE: 2.5 kHz
Max SPL 1m, pair (IEC short term): 119 dB peak
Max SPL 2m, 5.1 (IEC short term): 113 dB peak
Precision of Monitor matching: +/- 0.2 dB
Port tuning frequency: 30 Hz
Internal Cabinet volume: 37 liters
Bass principle: Bass reflex
Woofer: 1/2 pcs. 240 mm/10", one-piece molded polypropylene
Mains voltage: 100 to 240 VAC, 50 to 60 Hz (auto-select)
Power consumtion: 40 W @ 1/8 max power (IEC 60065)

Finish

Amp: Black anodized alu back plate
Cabinet: Dark gray MDF baffle, Silver foil
Dimensions (HxWxD): 310 x 480 x 420mm (12.2” x 18,9” x 16.5”)
Weight: 18 kg (39.6 lbs)
Amplifier: 250 W amp

Room & Distance

Typical room size 30-60 m3 / 1000-2000 ft3

System sample rates

Internal sample rate: 192 and 176.4 via Dual Wire (optional Digital Card required) and 96, 88.2, 64, 48, 44.1 or 32 kHz

AIR Masters only

I/O Connectors: XLR (2 channels AES/EBU in) 3 x RJ 45 proprietary TC Link
Formats: AES/EBU (24 bit)
Word clock input: BNC, 75ohm, 0.6-10 Vpp
Display: 2 x 16 character dot matrix
Operation: Menu system / Four buttons

Analog Input options

Input connectors: XLR balanced (pin 2+, pin 3-)
Impedance: 10/3 k ohm (Balanced/unbalanced)
Selectable Full scale Input level: +9, +15, +21, +27 dBu
Dynamic range: > 113 dB typ. (unweighted), BW: 20-20 kHz
THD+N: < -105 dB typ. @ 1 kHz, -3 dBFS
Crosstalk: < -120 dB, 20 Hz to 20 kHz
A to D Conversion: 24 bit (Dual bit delta sigma sampling at 4.1/5.6/6.1/6.1 MHz)
I/O Connectors: 2 x RJ45 proprietary TC-Link

EMC

Complies with: EN 55103-1 and EN 55103-2, FCC part 15 class B, CISPR 22 class B

Safety

Certified to: IEC 60065, EN 60065, UL 6500 and CSA E60065 CSA FILE #LR108093

Enviroment

Operating temperature: 32° F to 122° F (0° C to 50° C)
Storage temperature: -22° F to 167° F (-30° C to 70° C)
Humidity: Max. 90 % non-condensing

Warranty

Parts & Labor: 1 year

AIR Remote

AIR Remote is a dedicated hardware remote control that ensures convenient daily operation. AIR Remote provides instant access to all significant operation parameters such as global volume, reference levels, preset recall as well as solo and mute status for each monitor. The AIR Remote is powered through a ‘TC Link’ cable which is connected any AIR monitor.

Features

Global volume control
Recall and Storage of three Reference levels
Mute and Solo of individual speakers
Preset recall

In any audio system the level gain control is best placed as late as possible in the signal chain which is the reason that AIR enables control of level and gain directly on the monitors themselves.

The AIR Remote control is a natural extension to any AIR system ensuring convenience and performance in daily operation.

Main features include

Central master level adjustment of all connected monitors
Large friendly potentiometer with "analog feel"
Instant access of three different user defined Reference Level settings
Instant Preset Recall function up to 4 presets. This way you can easily switch between different setups from your listening position
Mute/unmute and solo function for each monitor in the setup

General

Finish: Black anodized alu & plastic
Dimensions (DxWxH): 120x70x35
Weight: 250g
I/O Connectors: 1 x RJ 45 proprietary TC Link

EMC

Complies with: EN 55103-1 & EN 55103-2, FCC part 15 class B, CISPR 22 class B

Safety

Certified to: IEC 60065, EN 60065, UL 6500 & CSA E60065, CSA FILE# LR108093

Enviroment

Operating temperature: 32° F to 122° F (0° C to 50° C)
Storage temperature: -22° F to 167° F (-30° C to 70° C)
Humidity: Max. 90% non-condensing

Warranty

Parts & labor: 1 year

Brochure PDF: View PDF Brochure
Manual PDF: View PDF Manual
Manufacturer's site: http://www.dynaudioacoustics.com/
Availability: Usually ships within 24 hrs.

Sale price: $ 10,708.00 (No sales tax outside of WA)

Found a better price? Give us a call!
or use the "Make an Offer" option below.




Quantity
OR What is "Make an Offer"

FREE GROUND SHIPPING ON MOST ORDERS!
(Within the continental USA)
No sales tax to customers outside of WA State.


Search

> Advanced Search

Shopping Cart

	Cart is empty

View cart
Secure checkout

If you have disabled Javascript in your browser click here

Username

Password

Recover password

Special Sales

Enter email address to receive information on our special sales.