TC Electronic D22 w/ Free Gear

• Seamless Delay update – No clicks, pitch changes and or other unwanted artifacts Digital I/O's: AES/EBU, S/PDIF, Wordclock BNC 75ohm
• 5200 ms Delay per channel
• Analog 24 bit A/D-D/A converters
• True 24 bit delay resolution
• Sample rates:  Internal 44.1, 48kHz - External 32, 44.1, 48kHz
• Sample Rate Conversion from 31-49kHz
• Total Recall via programmable setups
• Tap Delay time – Instant or Preview
• Delay time in: Frames (Various resolutions), Sub-frames, Fields, Milliseconds and Sub-Milliseconds (0.1 ms increments)
• Separate Dial and Nudge for Delay time adjustment
• Independent Dial/Nudge resolution
• Built-in digital Output Fader (remote controllable)
• Remote capabilities: RS-485 (Input only) for Recall Setup, Delay time adjustment & GPI for external control of the digital Output Fader or Tapped Delay time
• User Interface Lock mode for "Set & Forget" purposes

Digital Inputs and Outputs

• Connectors:  XLR (AES/EBU) RCA Phono (S/PDIF)
• Formats:  AES/EBU (24 bit), S/PDIF (20 bit), EIAJ CP-340, IEC 958
• Output Dither:  HPF TPDF dither 8-24 bit
• Word Clock Input:  BNC, 75 Ohm, 0.6 to 10 Vpp
• Sample Rates:  32 kHz, 44.1 kHz, 48 kHz
• Processing Delay:  0.5 ms @ 48 kHz
• Frequency Response DIO:  DC to 23.9 kHz ± 0.01 dB @ 48 kHz
• Sample Rate: Conversion Type  Asynchronous
• Dynamic Range:  120 dB
• THD+N:  -106 dB 44.1 to 48 kHz @ 1 kHz, -2 dBFS

Analog Inputs

• Connectors:  XLR balanced (pin 2 hot)
• Impedance:  20 kOhm (balanced)
• Max. Input Level:  +27 dBu (balanced)
• Min. Input Level: (for 0 dBFS)  -4 dBu (balanced)
• A to D Conversion:  24 bit (1 bit, 128 times oversampling)
• A to D Delay:  0.8 ms @ 48 kHz
• Dynamic Range:  >103 dB (unweighted), >106 dB(A)
• THD:  -95 dB (0.0018 %) @ 1 kHz, -6 dBFS (FS @ +18 dBu)
• Frequency Response:  10 Hz to 20 kHz: +0/-0.2 dB
• Crosstalk:  <-80 dB, 10 Hz to 20 kHz typical -100 dB @ 1 kHz

Analog Outputs

• Connectors:  XLR balanced (pin 2 hot)
• Bypass  Through relay
• Impedance:  40 Ohm (balanced)
• Max. Output Level:  +26 dBu (balanced)
• Full Scale Output Range:  -4 dBu to +26 dBu (balanced)
• D to A Conversion:  24 bit (1 bit, 128 times oversampling)
• D to A Delay:  0.57 ms @ 48 kHz
• Dynamic Range:  >100 dB (unweighted), >104 dB(A)
• THD:  -86 dB (0.005 %) @ 1 kHz, -6 dBFS (FS @ +18 dBu)
• Frequency Response:  10 Hz to 20 kHz: +0/-0.5 dB
• Crosstalk:  <-60 dB, 10 Hz to 20 kHz typical -90 dB @ 1 kHz

EMC

• Complies with  EN 55103-1 and EN 55103-2 FCC part 15, Class B CISPR 22, Class B

Safety

• Certified to  IEC 65, EN 60065, UL 1419 and CSA E65

Environment

• Operating Temperature  32° F to 122° F (0° C to 50° C)
• Storage Temperature  -22° F to 167° F (-30° C to 70° C)
• Humidity  Max. 90% non-condensing

PCMCIA Interface

• Connectors  PC Card, 68 pin type 1 cards
• Standards  PCMCIA 2.0, JEIDA 4.0
• Card Format  Supports up to 2 MB SRAM

Control Interface 

• RS485/RS422  In/Out/Through: 5 Pin DIN
• GPI, Pedal, Fader  1/4 inch phone jack

General

• Finish  Anodized aluminum face and top plate, Plated and painted steel chassis
• LCD  56 x 128 dot graphic LCD-display
• Dimensions  19" x 1.75" x 8.2" (483 x 44 x 208 mm)
• Weight  5.2 lb. (2.35 kg)
• Mains Voltage  100 to 240 VAC, 50 to 60 Hz (auto-select)
• Power Consumption  <20 W
• Backup Battery Life  >10 years

Warranty:  Parts and Labor  1 year

---

 

CASCADE FAT HEAD- RIBBON

 

 

The Cascade FAT HEAD offers the natural and open sound associated with the finest ribbon microphones. You will find that when recording acoustic guitars, guitar cabinets, vocals, drum over-heads, and countless other types of instruments, the ribbon microphone will produce the warmth that is vital to today's digital recording environment. We firmly believe you will also agree that this microphone will make a great addition to your collection.

We inspect and check the audio quality of each and every Cascade microphone before it leaves our shop, once you try one...you'll be a believer. 

Specifications:

• Type: Ribbon (velocity) Microphone
• Ribbon type & Dimensions: 99% Pure aluminum, 2.5 micron, 1 3/4" (L) X 3/16" (W)
• Polar pattern: Figure 8 Symmetrical design
• Sensitivity: -56 db +/- 2 dB (0 dB=1V/Pa)
• Frequency response: 30 to -18,000 Hz (+/- 3dB)
• Output Impedance: <=200 Ohms
• Recommended load impedance: >1000 Ohms
• Max.SPL (1% THD @1000 Hz): 165 dB
• Connector: 3-Pin male XLR
• Size: Diameter: 3” (O.D. grill), overall length 6 1/2”, 7/8" (O.D. body)

Includes:

• FAT HEAD Ribbon Microphone
• Premium suspension shockmount
• Wood box with heavy-duty latch and hinges
• Aluminum case
• Micro-fiber cleaning cloth

Frequency Response and Polar Pattern

Frequency Response and Polar Pattern w/ Stock Transformer

---

The Cascade M20u offers a new body style & grill along with improved specifications and performance. The new 1.07" gold vapor-diaphragm makes the M20u a great studio microphone capable of excelling in many applications of recording tasks and environments. The M20u is great for recording vocals, acoustic guitars, drums, guitar cabinets, horns and percussion instruments.

 

The M20u employs a -10 dB pad and lo-cut filter switch. With it's smooth frequency response, transparency, and dynamic range, it's easy to see why the M20u is a valuable addition to a wide range of users.

Specifications:

• Capsule: New 1.07”/28 mm 5µ edge connected, gold vapor-diaphragm
• Construction: heavy duty machined brass with anodized finish
• Polar Pattern: cardioid
• Operating voltage: +48V Phantom Power 
• Electronics: New low-noise class A discrete Fet+Bi-Polar, transformer-coupled
• Frequency range: 20 Hz to 20 kHz
• Sensitivity: -38.5 dB (0 dB=1V/Pa)
• Equivalent noise level: (A-Weighted per IEC 286-4) <15 dB
• Maximum SPL for THD: <0.5% (1 kHz) 140 dB w/Pad
• Switchable low frequency cut-off: -6 dB @ 100 Hz
• Switchable pad: -10 dB
• New improved suspension shockmount
• Connector: 3-Pin male XLR
• Weight: 525 grams/1.16 lbs.
• Dimensions: 47x215 mm / 2x8.6”

Includes:

• CASCADE M20u 1.07" LDC 
• Suspension shockmount
• Vinyl zipper pouch
• Micro-fiber cleaning cloth

  PDF with Frequency Response

 

Quote from Eben Grace:
"The Cascade M20 is an amazingly well built and great sounding microphone. It gets used all the time in my studio and makes a great match with the Grace Model 101." - Eben Grace of Grace Design.

---

 

 

Sennheiser HD280 Pro Headphones

 

The HD280 Professional is Sennheiser's most significant closed, circumaural headphone to be introduced in years. Designed to exceed the demands of the professional environment, the HD280Pro boasts extremely robust construction combined with extensive features that meet the requirements of today's most demanding applications. The unique collapsible design combined with swiveling ear cups, offers maximum flexibility in any application. Features Closed, dynamic stereo headphones Accurate, linear sound reproduction for critical monitoring applications.

 

Specifications: 

• Optimum impedance ensures universal compatibility
• Space saving design features collapsible, rotating earcups
• Up to 32 dB of ambient noise attenuation
• Neodymium magnets for high maximum SPL
• Single-sided, coiled cable with 3.5 mm mini jack with locking 1/4" adapter
• Very comfortable, even if used for long periods of time
• Rugged construction with user-replaceable parts
• 2 year warranty

---

 

 

CASCADE METAL PF-1 Pop-filter

 

The Cascade PF-1 features a 5.25" round filter and an attached 13" flexible goose neck with adjustable clamp.