Bayview Pro Audio

The Lavry Black DA10

Lavry Engineering introduces DA10, a new stand alone stereo digital to analog converter. The half rack unit can receive AES or SPDIF digital audio on XLR, RCA and optical link.

The DA provides three Clock modes. The preferred modes are CrystalLock ™ and Narrow Lock modes, but the unit also offers a Wide lock mode based on an internal Sample rate conversion for listening at non standard sampling rates.

The level of the analog outputs (balanced or unbalanced) is controlled by an up–down switch and a 2 digit display. The “potentiometer free” discrete analog attenuator provides up to 60dB very high precision volume control in 1 dB steps.

A state of the art discrete headphone driver is capable of accommodating at ease even the lowest impedance headphones. The unit includes a polarity switch, and a Stereo-Mono switch, a feature aimed at mastering studios.

Features:

Ultra low jitter modes (without sample rate conversion).
Included sample rate conversion for non standard rates.
Potentiometer free digitally controlled analog volume control.
High power discrete headphone output.
XLR, Coaxial (RCA) and Optical (Toslink light pipe) inputs.
Stereo/Mono switch (for monitoring of stereo sound field).
Polarity Inversion.
Optional twin DA10 19 inch rack mount kit. (available soon)

Specifications:

THD+N at max volume (volume = 55) – typical, 0.0008% FS, maximum 0.0013% FS
Test conditions: 20Hz – 20KHz, -3dBFS sine wave, 22-22KHz BW At all possible settings and switch combinations.
Dynamic Range: -110dB typical, -109 dB minimum
Test conditions: Non weighted At all possible settings and switch combinations.

Drive Capability:

24dBu Balanced XLR output into 1K ohms at Volume = 56 or lower
21dBu Balanced XLR output into 600 ohms at Volume = 53 or lower
18dBu Unbalanced XLR output into 600 ohms at Volume = 56 or lower
20dBu Headphone into 100 ohms at Volume = 56 or lower
20dBu Headphone into 50 ohms at Volume = 50 or lower

Volume Control Precision:

Integral linearity (deviation from straight line) – better than 0.1dB
Differential linearity (step size) – better than 0.08dB

AC Power:

Voltage: 90-264 VAC, Frequency 40-63Hz, Current 0.1A
Fuse Rating: 2.5A

Lavry Engineering DA10

Suggested Related Products