Home
Shopping Cart
Contact Us
1-888-718-0300 International: 1-360-867-1798

Neumann GFM 132

Neumann GFM 132

The GFM 132 is a boundary layer microphone. Through computer simulation Neumann optimized the design to be free of any comb filter effects due to reflections, typical of other such microphones. The smooth frequency response for all angles of incidence exhibits a rise in the upper frequency range. This assures that all sound sources, even distant ones, will be recorded with clarity and presence.

Therefore, typical applications are for live recordings, such as in the orchestra pit of opera houses, theaters, and on stage.

The back of the microphone has non-slip pads for its use in a horizontal or inclined position, and holes for wall suspension. It is supplied with a wooden case and a wind screen.

Background

Boundary-layer microphones are generally characterized by the following features:

- They have an identical flat frequency response in the diffuse-field and free-field.
- They have a hemispherical polar pattern, independent of the frequency.
- They have a 6 dB higher output level through pressure doubling at the boundary surface.

Until recently, neither the potential of identical diffuse- and free-field response, nor the ideal hemispherical polar patterns throughout the entire frequency range have been achieved by any known boundary-layer microphone. Circular, square, or rectangular plates were used to mount the acoustic transducer and to provide the "live" sound reflecting surface for pressure doubling at high frequencies.

However, such shapes have disadvantages: The sound pressure level at the position of the transducer depends on the frequency and the incidence angle. The incoming primary sound field is superimposed upon the secondary sound field resulting from diffraction at the edges of the plate. As a result, boundary-layer microphones using circular, square or rectangular shaped plates generate linear distortion, such as comb filter effects, of frequency and polar response.

The Neumann solution

The GFM 132 boundary-layer microphone has a unique, computer generated shape that totally avoids these disadvantages. The path lengths from each edge point to the center of the transducer are distributed evenly for all wavelengths within the frequency range.

This design eliminates any possible linear distortion of frequencies caused at the location of the electro-acoustic transducer by the interaction of the incoming primary sound field with the secondary sound field from diffraction at the edges of the plate.

The operating range of the plate reaches from the lowest frequency causing a pressure doubling in front of the plate to the upper limit of the audible range.

The microphone features a smooth frequency response for all angles of incidence, with a slight rise in amplitude in the upper frequency range. This assures that all sound sources, even dis-tant ones, will be recorded with clarity and presence.

Acoustic features

- The microphone provides high output voltage through pressure doubling at the boundary surface.

- Identical diffuse- and free-field frequency response. Its advantage is that the apparent tonal balance of a moving sound source is independent of the distance and direction.

- The special geometric shape prevents angle-dependent coloration in the vertical and horizontal planes.

- There are no comb filter effects in typical applications, for example on a speaker's desk, as they would occur through reflections, using conventional microphones.

- The hemispherical polar pattern is independent of the frequency, producing a spatial sound with presence and excellent transparency.

- As is common for a pressure transducer, the microphone is insensitive to structure borne noise and air movements.

- The microphone reproduces with great accuracy very low frequencies if the boundary layer is adequately large.

- In surroundings with good acoustics the GFM 132 creates incredibly realistic AB-stereo recordings, taking advantage of delay and intensity differences in the audio signal.

Electrical features

The GFM 132 uses transformerless circuitry and operates on 48 V phantom power. The usual output transformer is replaced by an electronic circuit.

As with traditional transformers, this design ensures good common mode rejection and prevents RF interference that may influence the balanced audio signal. The microphone features high output capability and extremely low self noise. It provides exceptionally clean sound reproduction free of coloration.

Attenuation

The microphone has a 10 dB attenuation switch to prevent the input of the following unit from being overloaded. The switch is located next to the cable connector at the side of the GFM 132 boundary layer microphone.

Features

Boundary layer microphone
Pressure transducer
Frequency independent hemispherical directional characteristic
Identical diffuse- and free-field response
No angle dependent coloration through patented triangular form
No comb filter effects
Insensitive to structure-borne noise

Specifications

Acoustical operating principle: Pressure transducer
Directional pattern: Hemispherical
Frequency range: 20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohm: 18 mV/Pa
Rated impedance: 50 ohms
Rated load impedance: 1000 ohms
Equivalent noise level, CCIR1): 24 dB
Equivalent noise level, A-weighted1): 14 dB-A
Signal-to-noise ratio, CCIR1) (rel. 94 dB SPL): 70 dB
Signal-to-noise ratio, A-weighted1) (rel. 94 dB SPL): 80 dB
Maximum SPL for THD 0.5%2): 137 dB
Maximum SPL for THD 0.5% with preattenuation2): 147 dB
Maximum output voltage: 10 dBu
Dynamic range of the microphone amplifier (A-weighted): 123 dB
Supply voltage (P48, IEC 61938): 48 V ± 4 V
Current consumption (P48, IEC 61938): 2 mA
Matching connector: XLR3F
Weight: 460 g
Diameter: 213 mm
Length: 168 mm

Brochure PDF: View PDF Brochure
Manual PDF: View PDF Manual
Manufacturer's site: http://www.neumannusa.com/
Availability: Usually ships within 24 hrs.

Price: ~~$ 1,999.99~~

Sale price: CALL 888.718.0300 or use the "MAKE OFFER" option below.
International customers call (360)867-1798
(9AM to 5PM Pacific Time)

Found a better price? Give us a call!
or use the "Make an Offer" option below.




Quantity
OR What is "Make an Offer"

FREE GROUND SHIPPING ON MOST ORDERS!
(Within the continental USA)
No sales tax to customers outside of WA State.


Search

> Advanced Search

Shopping Cart

	Cart is empty

View cart
Secure checkout

Username

Password

Recover password

Special Sales

Enter email address to receive information on our special sales.