Bayview Pro Audio

Home
Shopping Cart
Contact Us
1-888-718-0300 International: 1-360-867-1798

TC Electronic G-Sharp

G-Sharp is a dual engine guitar processor that combines superior TC Electronic effects with an easy-to-use interface. If you play the guitar you probably already know TC and the award-winning quality it stands for. G-Sharp is no exception and it comes packed with modulation, delay and reverb.

Through the years TC has been celebrated as a creator of superior technology and highly intuitive user interfaces. G-Sharp builds on that legacy giving you a highly sophisticated solution with a no-nonsense musician-friendly faceplate. Each of the two engines gives you 15 different factory presets that let you navigate smoothly through the parameters and quickly achieve the sound of your taste. As this is a true guitar effects processor, you can control G-Sharp via a footswitch or MIDI controller. The 99 user presets and a separate engine bypass function are easily controlled from the floor.

Be Sharp Live
Any guitar processor’s success or failure is measured on its live performance. The G-Sharp is probably one of the most intuitiveand easy-to-use guitar processors around. In fact, if you can operate a guitar pedal, you can operate the G-Sharp…It’s that simple! But that doesn’t mean what’s under the hood is simple. Nothing could be further from the truth. What you get is an easy to use, highly sophisticated guitar effects processor. Every preset sounds astonishingly good and you’re good to go and play live instantly. With the simple adjustment knobs you’re on the fast track to changing any preset to fit your personal taste.

With G-Sharp you get full and direct access to all the legacy reverbs and effects, and their parameters. Everything is easy to control from the front panel and that gives you a maximum of flexibility – at home, in the rehearsing room, or when you’re playing live.

The G-Sharp is packed with TC goodies and you’ll find high density 24-bit processing and AD/DA converters that fully live up to the TC reputation of high quality and tone preserving I/O. You’ll find an auto-sensing digital In at 24-bit S/PDIF that gives you a secure and bulletproof input connection in any setup. If digital input fails to register, the G-Sharp will automatically switch back to analog input selection.

The G-Sharp also gives you an easy-to-read preset display that always tells you what preset you’re currently using. On top of that there’s MIDI in/out, MIDI clock tempo sync, tap tempo from a pedal, and a global bypass function.

Plug the G-Minor triple footswitch or the TC G-Switch pedal to the G-Sharp, and you have instant access to parameters and changes right from the floor. The adaptive built in power supply, secures seamless operation at any main voltage.

Digital Input and Output

Connector:

Formats:

Sample Rates:

Processing Delay:

Frequency Response DIO:

Analog Inputs

Connectors:

Impedance, Bal / Unbal:

Max. / Min. Input Level

@ 0 dBFS:

Sensitivity Range

@ 12 dB headroom:

A to D Conversion:

A to D Delay:

Dynamic Range:

THD:

Frequency Response:

Crosstalk:

Analog Outputs

Connectors:

Impedance Bal / Unbal:

Max. Output Level:

D to A Conversion:

D to A Delay:

Dynamic Range:

THD:

Frequency Response:

Crosstalk:

EMC

Complies with:

Safety

Certified to:

Environment

Operating Temperature:

Storage Temperature:

Humidity:

Control Interface

MIDI:

Pedal:

General

Finish:

Display:

Dimensions:

Weight:

Mains Voltage:

Power Consumption:

Warranty Parts and labor:

RCA Phono (S/PDIF)

S/PDIF (24 bit), EIAJ CP-340, IEC 958

44.1 kHz. (48 kHz only @ Digital Input)

0.08 ms @ 48 kHz

DC to 23.9 kHz ± 0.01 dB @ 48 kHz

1/4" phone jack balanced, mono sense

21 kOhm / 13 kOhm

+24 dBu / 0 dBu

-12 dBu to +12 dBu

24 bit, 128 x oversampling bitstream

0.70 ms / 0.65 ms @ 44.1 kHz / 48 kHz

typ < -92 dB, 22 Hz to 22 kHz

typ < -90 dB (0.0032 %) @ 1 kHz, -1 dBFS

+0/-0.1 dB, 20 Hz to 20 kHz

typ < -100 dB, 20 Hz to 20 kHz

1/4" phone jack balanced

40 Ohm / 20 Ohm

+14 dBu

24 bit, 128 x oversampling bitstream

0.68 ms / 0.63 ms @ 44.1 kHz / 48 kHz

typ < -105 dB typ, 22 Hz to 22 kHz

typ < -97 dB (0.0014 %) @ 1 kHz, +13 dBu

+0/-0.5 dB, 20 Hz to 20 kHz

typ < -100 dB, 20 Hz to 20 kHz

EN 55103-1 and EN 55103-2

FCC part 15, Class B, CISPR 22, Class B

IEC 65, EN 60065, UL6500 and CSA E60065

CSA FILE #LR108093

32° F to 122° F (0° C to 50° C)

-22° F to 167° F (-30° C to 70° C)

Max. 90 % non-condensing

In/Out: 5 Pin DIN

1/4" phone jack

Anodized aluminum front

Plated and painted steel chassis

2 x 7 segment + LED's

19" x 1.75" x 4.2" (483 x 44 x 105.6 mm)

3.3 lb. (1.5 kg)

100 to 240 VAC, 50 to 60 Hz (auto-select)

<15 W

1 year

Found a better price? Give us a call!
or use the "Make an Offer" option below.