Alesis HD24 w/ Free Gear

Features

• 24-track, 24-bit digital audio recording
• 44.1kHz internal sample rates
• 12 tracks at 88.2 or 96kHz through the digital ins
• 24 tracks at 44.1 or 48kHz through the digital or analog ins
• Can easily be integrated into any exisiting ADAT system
• 103dB A/D/A converters
• Slaves to external word clock
• 40GB built-in HD
• Dual recording bays accept standard IDE drives
• Internal editing capabilities including cut, copy & paste
• Can run with multiple units
• 24 analog ins and outs (+4dBu, 1/4" TRS), 24 channels of ADAT Optical I/O
• All necessary hardware and remote included

Specifications

• 2 caddys: 1 with installed 40GB HD; 1 empty which can contain IDE/EIDE/ATA Drive of 5400/7200/ 10000 RPM up to 2000GB
• 24 tracks at 24-bit/48kHz, 12 tracks at 24-bit/96kHz
• Digital sample rates: 44.1 96kHz
• Analog sample rates: 44.1 48kHz (HD24). Upgrade HD24 to 96kHz with the EC-2.
• Analog connections: 24 - 24-bit inputs, 24 - 24-bit outputs (1/4" TRS, +4dBu)
• Digital connections: 24-channel I/O via 3 ADAT Optical inputs and 3 ADAT Optical outputs
• MIDI I/O, MTC O, ethernet connection, ADAT Sync I/O
• Alesis Sync in/out (DB-9)
• Word Clock input (BNC, 75?)
• Footswitch jack for punch in/out (1/4")
• LRC input for traditional wired remote (1/4")
• 10 Base-T Ethernet (RJ-45).
• Frequency response: 20Hz 20kHz +0/ 1dB. Dynamic range: 103dB A/D, >103dB D/A (A-weighted)
• Distortion: <0.003% THD+N
• Input levels: nominal +4dBu, maximum +19dBu Pitch control: +100 cents/ 200 cents, min-max 30 50kHz (30 100kHz with version 2.0)
• Power: 90 230V AC, 60W
• Dimensions: 19"W x 5"H x 17"D (483mm x 127mm x 432mm), 3U rackmount
• 20lbs.

---

 

 

CASCADE FAT HEAD- RIBBON

 

 

The Cascade FAT HEAD offers the natural and open sound associated with the finest ribbon microphones. You will find that when recording acoustic guitars, guitar cabinets, vocals, drum over-heads, and countless other types of instruments, the ribbon microphone will produce the warmth that is vital to today's digital recording environment. We firmly believe you will also agree that this microphone will make a great addition to your collection.

We inspect and check the audio quality of each and every Cascade microphone before it leaves our shop, once you try one...you'll be a believer. 

Specifications

• Type: large geometry (LRG) ribbon (velocity) Microphone
• Ribbon type & Dimensions: Pure aluminum, 2.5 microns, 1 3/4" (L) X 3/16" (W)
• Polar pattern: Figure 8
• Sensitivity: -56 db +/- 2 dB (0 dB=1V/Pa)
• Frequency response: 30 to 15 KHz (+/- 3dB)
• Impedance: <=600 Ohms
• Recommended load impedance: 3000 Ohms
• Max.SPL (1% THD @1000 Hz): 148 dB
• Equivalent noise level: to IEC 268-4 (A weighted) 18 dB
• S/N ratio: re 1Pa: 70 dB
• Connector: 3-Pin male XLR
• Size: Diameter: 3” (O.D. grill), overall length 6 1/2”, 7/8" (O.D. body)

Includes

• FAT HEAD Ribbon (LGR) Premium suspension shockmount 
• Zipper vinyl pouch w/ protective storage
• Micro-fiber cleaning cloth

Warranty:  Full coverage for one year from date of purchase.

---

• 21 mm diameter diaphragm
• Power: P24V or P48V Phantom Power
• Phasing: Positive pressure on diaphragm generates a positive voltage on pin #2 relative to pin #3
• Generating Element: Externally Biased Condenser
• Polar Pattern: Unidirectional (Cardioid)
• Frequency Response: 30 Hz - 20 kHz
• Sensitivity: -56 dB 0dB=1V/uBar @ 1 kHz
• Impedance: Low (Less than 200 Ohms)
• Equivalent Noise Level: +14 dB (A-weighted)
• Connector: 3-Pin male XLR
• Weight: 126 Grams

• 2 x Cascade M37 small cardioid condenser microphone
• 2 x Standard style microphone mounting clip
• 2 x Vinyl zipper pouch
• 2 x Foam Windscreen
• 2 x Micro-fiber cleaning cloth

• Omni capsule
• Suspension shockmount

Specifications

• Capsule: New 1.07”/28 mm 5µ edge connected, gold vapor-diaphragm
• Construction: heavy duty machined brass with anodized finish
• Polar Pattern: cardioid
• Operating voltage: +48V Phantom Power 
• Electronics: New low-noise class A discrete Fet+Bi-Polar, transformer-coupled
• Frequency range: 20 Hz to 20 kHz
• Sensitivity: -38.5 dB (0 dB=1V/Pa)
• Equivalent noise level: (A-Weighted per IEC 286-4) <15 dB
• Maximum SPL for THD: <0.5% (1 kHz) 140 dB w/Pad
• Switchable low frequency cut-off: -6 dB @ 100 Hz
• Switchable pad: -10 dB
• New improved suspension shockmount
• Connector: 3-Pin male XLR
• Weight: 525 grams/1.16 lbs.
• Dimensions: 47x215 mm / 2x8.6”

• CASCADE M20u 1.07" LDC
• Suspension shockmount
• Vinyl zipper pouch
• Micro-fiber cleaning cloth

Warranty: Full coverage for one year from date of purchase.

Quote from Eben Grace
"The Cascade M20 is an amazingly well built and great sounding microphone. It gets used all the time in my studio and makes a great match with the Grace Model 101." - Eben Grace of Grace Design.