Blue Mics Kiwi

All of us are unique in our own ways. Our personalities and facial features let us stand apart from one another.

At BLUE their goal is to achieve individual personalities for each of our microphones. Our top of the line Class A Discrete model, The Kiwi delivers just that. Capsule patterns of Cardioid, Figure of 8, Omni and selections in between for a total of nine different choices.

This is achieved in a careful, unique manner using our BLUE double backplate capsule. These unique capsules are measured in our anechoic chamber for the optimum performance. Mounting to the Kiwi microphone amplifier is provided by our mold injected rubber stem to help isolate unwanted rumble. Additional protection from low end rumble is provided by the use of our elastic spider type shockmount.

This microphone provides the recordist's with many options for the most critical of all recordings.

Optional accessories

• The Pop Filter — a vintage look, for a modern microphone. A handbuilt stainless steel pop filter
• The Shock — provides additional protection from unwanted low end and adds extra positioning to the microphone
• Kiwi Cable (KC)â„¢

Specifications

• Acoustical Operating Principle: Pressure gradient
• Directional Pattern: Multipattern
• Frequency Range: 20Hz–20KHz
• Rated Impedance: 50 ohms
• Rated Load Impedance: not less than 1kohm
• Sensitivity at 1KHz into 1kohm: 19mV/Pa
• S/N Ratio CCIR468–3: 76dB
• S/N Ratio DIN/IEC 651: 87dB-A
• Noise Level DIN/IEC 651: 8dB-A
• Maximum SPL for THD 0.5%: 133dB
• Dyn. Range of the Mic Amplifier: 75dB
• Supply Voltage: 48V phantom powered
• Weight: 900g
• Dimensions: 220mm x 60mm