Bayview Pro Audio

The LT-ADAT is a full-function ADAT interface that provides two ADAT lightpipe inputs and outputs for the Aurora 16/Aurora 8 converters. Operating at a sample rate of 48 kHz, the LS-ADAT I/O channel capacity is 16. Higher sample rates are supported using S/MUX technology: 8 channels at 96 kHz and 4 channels at 192kHz.

The LT-ADAT offers a wide variety of sample clock synchronizations options. Its sample clock source can be derived from a word clock received by the Aurora. In addition, the first lightpipe input can also be selected as the clock source.

Lynx LT-ADAT Specifications

ADAT Optical I/O
Number / Type	Two inputs and two outputs, compatible with Alesis ADAT Type I and Type II Optical Digital Interface Protocol, up to 24-bit data
Channels	16 @ 44.1kHz 48 kHz sample rates 8 @ 88.2 kHz and 96 kHz sample rates, S/MUX enabled 4 @ 176.4 kHz and 192 kHz sample rates, SMUX enabled
Input Receiver	Fast-locking phase-locked loop with 30 kHz to 55 kHz lock range
Clock Synchronization
Clock Sources	Aurora, Optical In 1
Architecture
Core	FPGA-based core. Support for field upgrades of firmware.
Routing/Mixing	Integrates with host card’s digital mixer to allow independent routing of ADAT I/O with Aurora analog and digital I/O.
Connections
I/O Ports	(4) Bracket-mounted TOSLINK connectors.
Other	LStream interface headers
General
Host Interface		Lynx proprietary LStream™ Interface: 24.5 Mbps bi-directional
Requirements		Aurora 16/Aurora 8 with Firmware Revision 12 or higher and available LSlot expansion slot.
Size		3.0” H X 5.0” W X 0.75” D
EMI Certifications		FCC and CE
Shipping Weight		2 pounds

Lynx Studio Technology LT-ADAT