Furman PM-PRO II - Power Conditioners/Conditioners

Furman PM-PRO II

The most widely recognized and trusted name in AC power conditioning is proud to introduce the PM-PRO II power conditioner featuring Furmanâ€™s revolutionary SMP+ technology. Furmanâ€™s Series Multi-Stage Protection Plus (SMP+) circuit features their exclusive Linear Filter Technology (LiFT) and Extreme Voltage Shutdown (EVS) and a high current TVZ-MOV. Together; these technologies comprise what is, without question, the worldâ€™s most advanced and comprehensive transient voltage surge suppressor.

SMP+ (Series Multi-Stage Protection Plus)
Furmanâ€™s SMP+ surge suppression virtually eliminates service calls. Traditional surge suppression circuits sacrifice themselves when exposed to multiple transient voltage spikes, requiring the dismantling of your system, and repair of your surge suppressor. Not so with SMP+. With Furmanâ€™s SMP+, damaging transient voltages are safely absorbed, clamped and dissipated - no sacrificed parts, no service calls, no down time.

Unique to Furmanâ€™s SMP+ is its unparalleled clamping voltage, even when tested beyond the grueling specifications of - USA/CIDAâ€™s A-1-1 test. While other designs offer clamping voltages that are well above 300VAC peak (far beyond long accepted professional standards), Furmanâ€™s SMP+ clamps at 188VAC peak, 133 VAC RMS even when tested with multiple 6000VAC - 3000 Amp surges! This unprecedented level of protection is only available with Furmanâ€™s SMP+ technology.

LiFT (Linear Filtering Technology)
Unfortunately, traditional AC filter/conditioners have been designed for unrealistic laboratory conditions. Prior technologies could actually harm audio and video performance more than they help, due to the resonant peaking of their antiquated, non-linear designs. Under certain conditions, these designs can actually add more than 10 dB of noise to the incoming AC line! Worse still, lost digital data, the need to reboot digital presets, or destroyed digital converters are frequently caused by excessive voltage spikes and AC noise contaminating the equipment ground. Furmanâ€™s SMP+ with LiFT takes another approach, ensuring optimal performance through linear filtering and no leakage to ground.

PM-PRO II Features:

SMP+ provides the highest level of protection available
LiFT significantly reduces AC line noise
E.V.S. protects equipment from dangerous overvoltage conditions
Zero ground contamination circuitry assures delivery of pure AC
BNC connector on the rear panel allows connection of any standard gooseneck lamp
Front panel digital LED meter displays incoming AC line voltage (+/- 1.5 VAC)
Additional front panel digital LED displays true RMS current draw
Eight rear panel outlets and one front panel outlet
20 amp rating, with high inrush capable magnetic circuit breaker
Front panel master power switch protected by hinged panel to prevent accidental power off
10 foot, 12 gauge heavy-duty power cable
Three year limited warranty

Specifications:

Current rating:

20 amps

Operating Voltage:
90 to 140 VAC

Over Voltage Shutdown:
140 VAC typically

Spike Protection Modes:
Line to neutral, zero ground leakage

Spike Clamping Voltage
188 VAC peak @ 3,000 Amps, 133 VAC RMS
(tested to UL-1449 and USA / CIDA A-1-1, 6,000 VAC @ 3,000 Amps)

Response time:
1 nanosecond

Maximum surge current:
6,500 amps

Noise attenuation:
10 dB @ 10 kHz, 40 dB @ 100 kHz, 100 dB @ 10 MHz
Linear attenuation curve from 0.05 - 100 Ohms line impedance

Dimensions:
1.75â€ H x 19â€ W x 10.5â€ D.

Weight:
11 lbs. (5 kg.)

Construction:
Steel chassis, .125â€ brushed and black anodized aluminum front panel;
glass epoxy printed circuit boards

Power consumption:
12 watts

Safety Agency Listings:
CE, NRTL-C