Bayview Pro Audio - R-4 w/ Free Gear

Edirol R-4

The Edirol R-4 brings you a new generation of portable recording. Enjoy superb sound quality. Use the 40GB hard disk drive for extended recording. Record up to four channels at once. Edit waveforms on the recorder itself. All this plus a compact size and light weight that assure outstanding mobility in the field. The Edirol R4. Gear up for the new generation of portable recording.

Extended Recording with 40GB Hard Disk Drive

Equipped with a 40GB hard disk drive, the R-4 can record up to 17 hours at maximum sound quality or up to 58 hours at CD quality.

Superior 24-bit/96-kHz Linear Recording

Totally uncompressed recording assures outstanding sound quality. Choose 16-bit or 24-bit quantization and a sampling rate of 44.1 kHz, 48 kHz, or 96 kHz. Save data as WAV files.

Simultaneous 4-Channel Recording

The 4 XLR/Phone combo jacks come with switchable phantom power and give you a choice of MONO, STEREO, STEREO X2, or 4CH recording. Digital input/output is also provided. Four-channel recording gives you exceptional flexibility. For example, you can use mics to capture the ambience of a performance hall while using line input to record the performance itself. Or you can record at several different level settings simultaneously.

On-Board Limiter

Built into the analog stage, the Limiter helps deliver a stable and reliable recording free of clipped noise from sudden input surges.

Built-In Nondirectional Stereo Microphones

The Edirol R-4's omnidirectional, back electret condenser microphones offer superb transient characteristics and vibration resistance.

Pre-Recording Function

When the REC button is pressed, the current material is appended to a buffer that contains recorded material from a few seconds earlier. This helps prevent missed recording opportunities or sound bites at the beginning of a recording.

Five High-Quality Effects

The Edirol R-4 lets you tailor the sound during both recording and playback.

L Terminal for Linking a Digital Video Camera

The Edirol R4's L terminal lets you connect a similarly equipped digital video camera to synchronize the camera start/stop while Edirol R-4 is recording. Counting the camera's two channels, this configuration gives you a total of six audio channels — a wealth of audio data to get creative with.

Waveform Editing Using Only the Edirol R-4

The Edirol R-4 is all you need to edit waveforms. Just watch the waveform on the LCD as you edit. Scrubbing playback with the shuttle dial lets you set the edit points precisely by sound.

Index Any Point Instantly

Press the mark button anytime during recording or playback to mark that point for easy, instant indexing later. With the A-B repeat function you can set two points and repeatedly play back the material between them.

Easy Playback with the Jog Dial

Use the jog dial to fast-forward or rewind at any of seven speed levels.

Built-In Stereo Speakers

The R-4's built-in speakers make it easy to monitor recorded sound without headphones.

USB 2.0 Terminal Provides a High-Speed Computer Data Link

The USB 2.0 high-speed mode transfers data about 20 times faster than DAT. You can also use the R-4 as a 40GB storage device. Edit R-4 files directly from DAWs and other applications.

Advanced Linking with the EDIROL DV-7DL

A USB cable is all you need to connect directly to an EDIROL DV-7DL Video Editor and exchange files.

CompactFlash™ Slot

The CompactFlash™ slot makes it easy to read or write recorded files. You can use CompactFlash™ memory to give data to colleagues or to transfer data to equipment not equipped with a USB interface.

2-Way Power Supply

The R-4 runs on eight AA batteries or with the AC adaptor.

Digital Audio Input/Output

Exchange data with other digital equipment while maintaining fidelity with the coaxial digital audio in/out.

Soft Carrying Case

The R-4 comes with a soft carrying case with a shoulder strap for safe, comfortable use in the field.

Specifications

Connectors

Channel 1/2 3/4: XLR/PHONE type (phantom powered: XLR only)

Impedance

4 k Ohms or more

Frequency Response

44.1kHZ: 20Hz to 20kHz (0 dB/-2dB)
48kHz: 20Hz to 22kHz (0 dB/-2dB)
96kHz: 20Hz to 40kHz (0dB/-3dB)

Nominal Input Level

Channel 1,2,3,4:
60 to +4 dBu (Variable)

Output

Connectors
RCA Phono type (L,R)

Headphones Jack Stereo

1/4” Phone Type

Impedance

L,R: 950 Ohms, PHONES: 10 Ohms

Output Level

L,R: -7.8 dBu (-10 dBV)
PHONES: 30mW +30mW (32 Ohms load)

Digital Input/Output

Connectors

Digital Output Jack:
Coaxial Type (conforms to IEC60958)
Digital Input Jack: Coaxial Type (conforms to IEC60958)

Other Connectors

USB Connector
B Type

L-Connector

Mini-Miniature Phone Type
Receive Only
Card Slot
CompactFlash
Effect Unit

Tone Control

Shelving EQ
Graphic EQ
Enhancer
Noise Reducer
Compressor
96kHz: Invalid

Controls

Input Gain Knobs (CH1, CH2, CH3, CH4)
Input Level Switch (CH1/2, LINE, MIC)
Input Level Switch (CH3/4, LINE MIC)
Monitor Knob
Jog Shuttle
Transport Buttons (PREV, NEXT, STOP,PAUSE, PLAY, REC)
Function Buttons
Hold Switch
Phantom Switch (CH1/2, CH3/4)
Limiter Switch

Display

128 x 64 Graphic LCD

Signal Processing

AD/DA Conversion: 24-bit
Headroom: 12 dB

Sample Rate

AD/DA Conversion 44.1/48/96kHz

Digital Output

44.1/48/96kHz

Digital Input

32kHz to 96kHz (Convert to internal sample rate)

Hard Disk Capacity

40GB

Recording Time

16-bit/44.1kHz: 58 hours, 16-bit/48kHz: 53 hours, 24-bit/96kHz: 17 hours

Power Supply

DC 9V(AC Adapter)
AA Battery x 8

Dimensions

254(W) x 221.8(D) x 72.2(H)mm
Weight 1.7kg

Accessories

USB Cable
AC Adapter (PSB-1U)
AC Cord
Owner’s Manual
Carry Case

CASCADE M20u - Large Diaphragm Condenser

The Cascade M20u offers a new body style & grill along with improved specifications and performance. The new 1.07" gold vapor-diaphragm makes the M20u a great studio microphone capable of excelling in many applications of recording tasks and environments. The M20u is great for recording vocals, acoustic guitars, drums, guitar cabinets, horns and percussion instruments.

The M20u employs a -10 dB pad and lo-cut filter switch. With it's smooth frequency response, transparency, and dynamic range, it's easy to see why the M20u is a valuable addition to a wide range of users.

Specifications

Capsule: New 1.07”/28 mm 5µ edge connected, gold vapor-diaphragm
Construction: heavy duty machined brass with anodized finish
Polar Pattern: cardioid
Operating voltage: +48V Phantom Power
Electronics: New low-noise class A discrete Fet+Bi-Polar, transformer-coupled
Frequency range: 20 Hz to 20 kHz
Sensitivity: -38.5 dB (0 dB=1V/Pa)
Equivalent noise level: (A-Weighted per IEC 286-4) <15 dB
Maximum SPL for THD: <0.5% (1 kHz) 140 dB w/Pad
Switchable low frequency cut-off: -6 dB @ 100 Hz
Switchable pad: -10 dB
New improved suspension shockmount
Connector: 3-Pin male XLR
Weight: 525 grams/1.16 lbs.
Dimensions: 47x215 mm / 2x8.6”

Includes

CASCADE M20u 1.07" LDC
Suspension shockmount
Vinyl zipper pouch
Micro-fiber cleaning cloth

Warranty Full coverage for one year from date of purchase.

Quote from Eben Grace:
"The Cascade M20 is an amazingly well built and great sounding microphone. It gets used all the time in my studio and makes a great match with the Grace Model 101." - Eben Grace of Grace Design.

Edirol R-4 w/ Free Gear