Summit Audio TLA-100A w/ Free Gear - Preamps/Microphone

The Summit Audio TLA-100A Tube Leveling Amplifier is a classic design with a technological hybrid of vacuum tube and solid state devices. The harmonious blend of old and new technologies produces the incredibly warm and smooth sound of vacuum tubes in a compression device that does not have the inherent disadvantages of older designs. Summit Audio has been making the TLA-100A for over 20 years and produces a sound that remains a much sought after quality that is used on literally thousands of records and in live sound venues across the world.

Compressing in a musically satisfying way is easy with the TLA-100A; the incredibly forgiving circuit design makes it almost impossible to make it 'pump and breath'. When fast transient signals are being sent to the TLA-100A, the unit reacts quickly both in attack and release, when the signal is more legato, the attack and release times automatically react more slowly resulting in a set-and-forget compressor that always sounds right with a minimum of knob fiddling. Try it on vocals and bass, also great for kick drum and guitars. The TLA-100A really shines for tracking and mixing individual instruments and is linkable with another TLA-100A for stereo signals.

CASCADE FAT HEAD- RIBBON

The Cascade FAT HEAD offers the natural and open sound associated with the finest ribbon microphones. You will find that when recording acoustic guitars, guitar cabinets, vocals, drum over-heads, and countless other types of instruments, the ribbon microphone will produce the warmth that is vital to today's digital recording environment. We firmly believe you will also agree that this microphone will make a great addition to your collection.

We inspect and check the audio quality of each and every Cascade microphone before it leaves our shop, once you try one...you'll be a believer.

Specifications:

Type: Ribbon (velocity) Microphone
Ribbon type & Dimensions: 99% Pure aluminum, 2.5 micron, 1 3/4" (L) X 3/16" (W)
Polar pattern: Figure 8 Symmetrical design
Sensitivity: -56 db +/- 2 dB (0 dB=1V/Pa)
Frequency response: 30 to -18,000 Hz (+/- 3dB)
Output Impedance: <=200 Ohms
Recommended load impedance: >1000 Ohms
Max.SPL (1% THD @1000 Hz): 165 dB
Connector: 3-Pin male XLR
Size: Diameter: 3” (O.D. grill), overall length 6 1/2”, 7/8" (O.D. body)

Includes:

FAT HEAD Ribbon Microphone
Premium suspension shockmount
Wood box with heavy-duty latch and hinges
Aluminum case
Micro-fiber cleaning cloth

Frequency Response and Polar Pattern

Frequency Response and Polar Pattern w/ Stock Transformer

The Cascade M20u offers a new body style & grill along with improved specifications and performance. The new 1.07" gold vapor-diaphragm makes the M20u a great studio microphone capable of excelling in many applications of recording tasks and environments. The M20u is great for recording vocals, acoustic guitars, drums, guitar cabinets, horns and percussion instruments.

The M20u employs a -10 dB pad and lo-cut filter switch. With it's smooth frequency response, transparency, and dynamic range, it's easy to see why the M20u is a valuable addition to a wide range of users.

Specifications:

Capsule: New 1.07”/28 mm 5µ edge connected, gold vapor-diaphragm
Construction: heavy duty machined brass with anodized finish
Polar Pattern: cardioid
Operating voltage: +48V Phantom Power
Electronics: New low-noise class A discrete Fet+Bi-Polar, transformer-coupled
Frequency range: 20 Hz to 20 kHz
Sensitivity: -38.5 dB (0 dB=1V/Pa)
Equivalent noise level: (A-Weighted per IEC 286-4) <15 dB
Maximum SPL for THD: <0.5% (1 kHz) 140 dB w/Pad
Switchable low frequency cut-off: -6 dB @ 100 Hz
Switchable pad: -10 dB
New improved suspension shockmount
Connector: 3-Pin male XLR
Weight: 525 grams/1.16 lbs.
Dimensions: 47x215 mm / 2x8.6”

Includes:

CASCADE M20u 1.07" LDC
Suspension shockmount
Vinyl zipper pouch
Micro-fiber cleaning cloth

PDF with Frequency Response

Quote from Eben Grace:
"The Cascade M20 is an amazingly well built and great sounding microphone. It gets used all the time in my studio and makes a great match with the Grace Model 101." - Eben Grace of Grace Design.

Sennheiser HD280 Pro Headphones

The HD280 Professional is Sennheiser's most significant closed, circumaural headphone to be introduced in years. Designed to exceed the demands of the professional environment, the HD280Pro boasts extremely robust construction combined with extensive features that meet the requirements of today's most demanding applications. The unique collapsible design combined with swiveling ear cups, offers maximum flexibility in any application. Features Closed, dynamic stereo headphones Accurate, linear sound reproduction for critical monitoring applications.

Specifications

Optimum impedance ensures universal compatibility
Space saving design features collapsible, rotating earcups
Up to 32 dB of ambient noise attenuation
Neodymium magnets for high maximum SPL
Single-sided, coiled cable with 3.5 mm mini jack with locking 1/4" adapter
Very comfortable, even if used for long periods of time
Rugged construction with user-replaceable parts
2 year warranty

CASCADE METAL PF-1 Pop-filter

The Cascade PF-1 features a 5.25" round filter and an attached 13" flexible goose neck with adjustable clamp.