Grace Design m101 w/ Free Gear

Grace Design m101

In 2000, the model 101 helped fuel a revolution. When people took professional recording into their own hands, it was there with all of the quality and performance of a high-end mic preamplifier, but with a price that made it available to the masses. 8 years later, and the cause moves forward with the newly redesigned m101.

With its impressive list of new features, the m101 is ready to give any mic preamplifier a run for its money. Consider the new audio signal path with 0.5% precision metal film resistors, 12 position gold plated rotary gain switch, a built-in universal AC input module, or our exclusive RIBBON mic mode - and the picture becomes clear: This is now a fully professional, state of the art precision mic preamp that roundly outperforms anything in its class. All this at the same affordable price of the original model 101.

From podcast to concert hall, the m101 brings the build quality, refinement and performance to revolutionize any recording facility.

Features

• Fast and musical transimpedance architecture
• Updated audio path with 0.5% precision metal film resistors
• New 12 position gold plated rotary gain switch
• High performance output line driver amplifier and HPF amplifier
• New Ribbon mic mode (also great for dynamic mics)-  Relay bypass of phantom power decoupling capacitors, increased input impedance, and 48V lockout
• Wider 10-75dB gain range
• Enhanced RFI interference suppression
• Three output connectors: XLR balanced, TRS balanced and ¼” unbalanced
• Bombproof laser-etched black anodized frontpanel
• Sealed gold contact relay for Hi-Z input switching
• Built in power supply / no wall-wart!
• Led indicators for +48V, Ribbon mode, and HPF
• Five year warranty on parts and labor
• Made in the USA

• GAIN RANGE (5dB steps)
• Mic input  10-65dB
• Hi-Z input  -10-45dB
• Output trim control  0 to +10dB
• THD+N
• @ 20dB Gain +20dBu out  <0.00085%
• @ 40dB Gain +20dBu out  <0.0010%
• @ 60dB Gain +20dBu out  <0.0050%
• INTERMODULATION DISTORTION
• @ 40dB Gain +20dBu out
• SMPTE/DIN 4:1 7kHz/50Hz  <0.0020
• NOISE - REFERRED TO INPUT
• 50Ω source  <-130dB
• 150Ω source  <-128dB
• 600Ω source  <-124dB
• CMRR
• 100Hz  >68dB
• 1kHz  >75dB
• 10kHz  >65dB
• PHASE DEVIATION (HPF off)
• 50Hz-25kHz  <6°
• FREQUENCY RESPONSE
• Mic input @ 40dB Gain -3dB  4.5Hz-390kHz
• Mic input @ 40dB Gain -0.5dB  10.5Hz-140kHz
• Hi-Z input @ 20dB Gain -3dB  2.5Hz-195kHz
• Hi-Z input @ 20dB Gain -0.5dB  6Hz-74kHz
• IMPEDANCE
• Mic input  8.1kΩ
• Mic input, Ribbon mode  20kΩ
• Hi-Z input (unbalanced)  1MΩ
• Hi-Z input (balanced)  2MΩ
• Balanced Output  300Ω
• Balanced Output  150Ω
• PEAK LED METER
• Green threshold  -14dBu
• Red threshold  +16dBu
• MAXIMUM OUTPUT LEVEL
• 100k Ohm load, 0.1% THD  +25dBu
• WEIGHT and DIMENSIONS
• 2.4 lbs  H1.7” x W8.5” x D9.0”
• 1.09 kg  H4.3cm x W21.6cm x D22.8cm
• POWER CONSUMPTION
• 100-240VAC  5 Watts Max

---

The Cascade M20u offers a new body style & grill along with improved specifications and performance. The new 1.07" gold vapor-diaphragm makes the M20u a great studio microphone capable of excelling in many applications of recording tasks and environments. The M20u is great for recording vocals, acoustic guitars, drums, guitar cabinets, horns and percussion instruments.

The M20u employs a -10 dB pad and lo-cut filter switch. With it's smooth frequency response, transparency, and dynamic range, it's easy to see why the M20u is a valuable addition to a wide range of users.

Specifications:

• Capsule: New 1.07”/28 mm 5µ edge connected, gold vapor-diaphragm
• Construction: heavy duty machined brass with anodized finish
• Polar Pattern: cardioid
• Operating voltage: +48V Phantom Power 
• Electronics: New low-noise class A discrete Fet+Bi-Polar, transformer-coupled
• Frequency range: 20 Hz to 20 kHz
• Sensitivity: -38.5 dB (0 dB=1V/Pa)
• Equivalent noise level: (A-Weighted per IEC 286-4) <15 dB
• Maximum SPL for THD: <0.5% (1 kHz) 140 dB w/Pad
• Switchable low frequency cut-off: -6 dB @ 100 Hz
• Switchable pad: -10 dB
• New improved suspension shockmount
• Connector: 3-Pin male XLR
• Weight: 525 grams/1.16 lbs.
• Dimensions: 47x215 mm / 2x8.6”

Includes:

• CASCADE M20u 1.07" LDC 
• Suspension shockmount
• Vinyl zipper pouch
• Micro-fiber cleaning cloth

  PDF with Frequency Response