Grace Design m802 w/ Free Gear

When Grace set out to develop the new Grace Design m802 eight channel remote control microphone preamplifier, they knew they had their work cut out for them. After all, the finest audio engineers in music recording, film scoring, major artist tours and premier recording schools have relied on the model 801R system for its sonic performance and reliability for years.

So the newly designed m802 system boasts many significant upgrades, which not only set it apart from its beloved predecessor, but from any other high performance mic preamplifier available.

The m802 can be controlled directly from Digidesign® ProTools|HD® systems, compatible control surfaces and many other MIDI devices. Working closely with Digidesign, Grace engineers have adapted their control spec to directly address the m802 as an integrated part of a ProTools|HD® system. Additionally, the m802 can be controlled by a wide variety of MIDI mappable devices, making it easily integrated into a wide variety of remote recording situations.

DPA® 4000 series 130V microphones are widely regarded as some of the finest reference-quality microphones available. But with a 130V power requirement, microphone preamplifier options have been limited. So Grace made the m802 an excellent compliment for DPA® microphones by adding a 130V power option, available on a per channel pair basis.

Most model 801R users would happily testify that was the ultimate transparent, high-fidelity mic amplifier circuitry. And while they wouldn’t be wrong, Grace wasn't quite done tweaking. First, the signal path of the m802 has been updated to be fully balanced from start to finish, resulting in a noticeable dynamic range improvement. Next, output current has been increased so that even longer audio cable runs can be achieved without signal loss. Finally, Grace has included a provision for a high definition 24-bit/192 kHz converter card in the future.

Grace completely redesigned the Remote Control Unit (RCU) to provide greatly improved ergonomics and system control. The updated RCU now offers dedicated individual channel select switches and a highly visible blue LED numeric display for channel gain settings. The RCU will effortlessly control a system of eight m802s from up to 1000’ away. And both the RCU and the m802 now come with a high contrast, easy on the eyes white backlight LCD.

The m802 system now resides in the same bold, stainless steel chassis as Grace's m series monitoring systems, which is quite rugged and easy to maintain.

Whatever your application, Grace invites you to discover the remarkable sonic performance, functionality and reliability of the new m802. Grace is confident that it will help you make the finest recordings of your career.

FREQUENCY RESPONSE
@ 40.5dB gain ± 0.2dB 50 Ohm source 15Hz-300KHz
@ 40.5dB gain ± 3dB 50 Ohm source 4.5Hz-1.0MHz

THD+N
@ 19.6dB gain +20dBu out, 1kHz <.0007%
@ 40.5dB gain +20dBu out, 1kHz <.0010%
@ 60.0dB gain +20dBu out, 1kHz <.0050%

INTERMODULATION DISTORTION
@40dB gain +20dBu out
SMPTE/DIN 1:1 (50Hz, 7kHz) <.0015%
SMPTE/DIN 4:1 (50Hz, 7kHz) <.0040%

NOISE - REFERRED TO INPUT
@60dB gain 50 Ohm source -129dB
@60dB gain 150 Ohm source -127dB
@60dB gain 600 Ohm source -123dB

PHASE DEVIATION
100-20KHz @40.5dB gain <3°

CROSSTALK
Any Channel @40.5dB gain 1kHz -110dB

CMRR
@60dB gain, 3.5Vcm, 1KHz >70dB
@60dB gain, 3.5Vcm, 10KHz >70dB

PHANTOM POWER
Voltage +48V +0.9/ -0.0
6.8k? resistor match tolerance +/- 0.01%

MAXIMUM OUTPUT LEVEL
Balanced +27dBu
Unbalanced +21dBu

IMPEDANCE
Input 4350 Ohms
Output 200 Ohms
Minimum Load Impedance 50 Ohms

WEIGHT 12lbs

DIMENSIONS 2U rack mount x 10” deep

POWER SUPPLY SPECIFICATIONS

POWER CONSUMPTION
100-240VAC 50/60Hz 60 Watts max

WEIGHT 6.25lbs

DIMENSIONS H1.7” x W8.5” x D8.5”

REMOTE CONTROL UNIT SPECIFICATIONS

POWER CONSUMPTION
7.5VDC .55A

WEIGHT 1.25lbs

DIMENSIONS 1.6” x 8” x 5.25”

CASCADE FAT HEAD- RIBBON

The Cascade FAT HEAD offers the natural and open sound associated with the finest ribbon microphones. You will find that when recording acoustic guitars, guitar cabinets, vocals, drum over-heads, and countless other types of instruments, the ribbon microphone will produce the warmth that is vital to today's digital recording environment. We firmly believe you will also agree that this microphone will make a great addition to your collection.

We inspect and check the audio quality of each and every Cascade microphone before it leaves our shop, once you try one...you'll be a believer.

Specifications:

Type: Ribbon (velocity) Microphone
Ribbon type & Dimensions: 99% Pure aluminum, 2.5 micron, 1 3/4" (L) X 3/16" (W)
Polar pattern: Figure 8 Symmetrical design
Sensitivity: -56 db +/- 2 dB (0 dB=1V/Pa)
Frequency response: 30 to -18,000 Hz (+/- 3dB)
Output Impedance: <=200 Ohms
Recommended load impedance: >1000 Ohms
Max.SPL (1% THD @1000 Hz): 165 dB
Connector: 3-Pin male XLR
Size: Diameter: 3” (O.D. grill), overall length 6 1/2”, 7/8" (O.D. body)

Includes:

FAT HEAD Ribbon Microphone
Premium suspension shockmount
Wood box with heavy-duty latch and hinges
Aluminum case
Micro-fiber cleaning cloth

Frequency Response and Polar Pattern

Frequency Response and Polar Pattern w/ Stock Transformer

Cascade M39 Stereo Pair - 22mm Small Condenser

The Cascade M39 is a cardioid condenser that has a 22mm diameter diaphragm. The Cascade M39 has a silky, open audio quality with a wide dynamic range essential for accurate, instrument recording and is ideal for use as drum over heads, hi-hat, snare, or acoustic instruments such as guitar and piano. The M39 features a high SPL rating of 137 dB and is capable of capturing even the loudest of audio sources. The M39 is a compact microphone that is great for recording a wide range of instruments and is in use in professional and project studios around the world.

Note: In additional to the exceptional audio quality that these microphones exhibit, they also offer an anodized exterior finish that is superb.

Specifications:

22mm diameter diaphragm
Power: P24V or P48V Phantom Power
10dB switchable attenuation, selectable
-10dB low-frequency roll-off
Phasing: Positive pressure on diaphragm generates a positive voltage on pin #2 relative to pin #3
Generating Element: Externally Biased Condenser
Polar Pattern: Unidirectional (Cardioid)
Frequency Response: 30 Hz - 20 kHz
Sensitivity: -56 dB 0dB=1V/uBar @ 1 kHz
Impedance: Low (Less than 200 Ohms)
Equivalent Noise Level: +14 dB (A-weighted)
Connector: 3-Pin male XLR
Weight: 135 Grams

Includes:

Stereo Pair Cascade M39 22mm cardioid condenser microphone
2 x Standard style microphone mounting clip
Molded plastic case with EVA foam
Micro-fiber cleaning cloth

The Cascade M20u offers a new body style & grill along with improved specifications and performance. The new 1.07" gold vapor-diaphragm makes the M20u a great studio microphone capable of excelling in many applications of recording tasks and environments. The M20u is great for recording vocals, acoustic guitars, drums, guitar cabinets, horns and percussion instruments.

The M20u employs a -10 dB pad and lo-cut filter switch. With it's smooth frequency response, transparency, and dynamic range, it's easy to see why the M20u is a valuable addition to a wide range of users.

Specifications:

Capsule: New 1.07”/28 mm 5µ edge connected, gold vapor-diaphragm
Construction: heavy duty machined brass with anodized finish
Polar Pattern: cardioid
Operating voltage: +48V Phantom Power
Electronics: New low-noise class A discrete Fet+Bi-Polar, transformer-coupled
Frequency range: 20 Hz to 20 kHz
Sensitivity: -38.5 dB (0 dB=1V/Pa)
Equivalent noise level: (A-Weighted per IEC 286-4) <15 dB
Maximum SPL for THD: <0.5% (1 kHz) 140 dB w/Pad
Switchable low frequency cut-off: -6 dB @ 100 Hz
Switchable pad: -10 dB
New improved suspension shockmount
Connector: 3-Pin male XLR
Weight: 525 grams/1.16 lbs.
Dimensions: 47x215 mm / 2x8.6”

Includes:

CASCADE M20u 1.07" LDC
Suspension shockmount
Vinyl zipper pouch
Micro-fiber cleaning cloth

PDF with Frequency Response

Quote from Eben Grace:
"The Cascade M20 is an amazingly well built and great sounding microphone. It gets used all the time in my studio and makes a great match with the Grace Model 101." - Eben Grace of Grace Design.

Sennheiser HD280 Pro Headphones

The HD280 Professional is Sennheiser's most significant closed, circumaural headphone to be introduced in years. Designed to exceed the demands of the professional environment, the HD280Pro boasts extremely robust construction combined with extensive features that meet the requirements of today's most demanding applications. The unique collapsible design combined with swiveling ear cups, offers maximum flexibility in any application. Features Closed, dynamic stereo headphones Accurate, linear sound reproduction for critical monitoring applications.

Specifications:

Optimum impedance ensures universal compatibility
Space saving design features collapsible, rotating earcups
Up to 32 dB of ambient noise attenuation
Neodymium magnets for high maximum SPL
Single-sided, coiled cable with 3.5 mm mini jack with locking 1/4" adapter
Very comfortable, even if used for long periods of time
Rugged construction with user-replaceable parts
2 year warranty

CASCADE METAL PF-1 Pop-filter

The Cascade PF-1 features a 5.25" round filter and an attached 13" flexible goose neck with adjustable clamp.

Suggested Related Products